|
Hardware requirements |
Scroll |
The KOMPAS-3D software runs on processors with x86-64 architecture (also referred to as x64 architecture).
Minimum |
•CPU with SSE2 and AVX support •graphic adapter with OpenGL 2.0 support •all the other components of minimum hardware configuration to install and run KOMPAS-3D are defined by the minimum system requirements of the corresponding operating systems |
|
|
AVX support is required if the Full installation type is selected or if the Custom type includes the Extended Proprietary Format Readers installation. |
|
Recommended for optimum performance |
•multi-core CPU (4 cores or more), 3 GHz or higher •16 GB RAM or more •video card with OpenGL 4.5 support, with 4 GB of video memory or more, video memory bandwidth of 140 GB/s or more •display with 1920x1080 or higher resolution |
|
Recommended for large assemblies |
•multi-core CPU (6 cores or more), with the fastest available clock frequency (4 GHz or higher) •64 GB RAM or more •video card with OpenGL 4.5 support, with 8 GB of video memory or more, video memory bandwidth of 240 GB/s or more •display with 1920x1080 or higher resolution •solid-state drive (SSD) to install KOMPAS-3D and store KOMPAS documents |
|
Stable performance on embedded graphics cardsd is not guaranteed. |
A DVD-ROM drive is required to install the software from the distribution media.
To print documents, you can use any printers or plotters with drivers compatible with your version of Windows.
|
When selecting the hardware, please keep in mind that the hardware requirements increase when the tasks become more complex (detailed drawings, complex assemblies). |
|
The performance of KOMPAS-3D on a specific computer also depends on the performance of its particular components (CPU, RAM, etc.). For more information about optimum hardware configuration you can contact your hardware supplier. |
