|
Sheets location in the print field |
Scroll |
There are several methods to place the sheets in the print field:
•move,
•rotate,
•scaling.
The sheet, the position of which in the print field needs to be modified, must be selected.
To select one or more sheets, click them or select them in the Sheet list on the Parameter panel. Press the <Tab> key to navigate between sheets.
The currently selected sheet is displayed in green frame.
|
If the boundary frame is bigger than the sheet, it means that one or both dimensions of the view on the sheet go outside the borders of the sheet. |
The sections Moving a sheet and Rotating a sheet dedicated to the placement of a single highlighted sheet, and the section Placing several sheets — to the placement of several sheets.
To select all the sheets of the documents in the preview, use the Select all 
command.
This command is available if the print field page selection mode is off.
Selecting sheets using a frame
You can select several document sheets using a frame around them or intersecting with them. The Select Sheets with Frame 
command is used for this purpose.
This command is available if the print field page selection mode is off.
You can also select several sheets while holding the <Ctrl> key.
