|
Assembly components explosion mode |
Scroll |
To display the components of an assembly in the exploded view, use the Explode components 
command.
After the command is invoked, the process will start settings for component spacing parameters.
When the process of setting the spacing parameters is completed, the assembly will be displayed according to the set parameters. The icon of the mode will appear in the graphic area of the model 
.
The process of setting the spacing parameters is not started if these parameters are already set. The system immediately switches to the mode of displaying the assembly in the spaced view.
When switching to the spreading mode, the color of the current document tab and the Parameter panel title changes to blue.
When the component spacing mode is on, you cannot edit the assembly, create 3D curves, surfaces, auxiliary objects, design elements, overlap and work with the product composition. In addition, the assembly design elements, such as position lines and other markings, dimensions, captions, etc., are no longer displayed in the spacing mode.
To exit the component spacing mode, click the mode icon in the graphics area or invoke the Explode components command again.
|
The separation parameters set for the subassembly are not taken into account in the assembly. |
