KOMPAS-3D v23

Item

Description

Machining Method

The group of buttons allows to select the type of surface finish signage:

•Not specified,

•Delete material layer,

•Keep material Layer.

Along Contour

The option allows for applying a surface finish designation for surfaces forming a contour.

Leader

The toggle switch controls the presence of a leader line in the landing.

•If the toggle switch is set to position I (enabled), then a leader line and a horizontal landing appears in the signage. On the Parameter Panel, there are elements of setting up the leader.

•If the toggle switch is set to position 0 (disabled), the signage of surface finish created without a landing.

Leader Landing

The group of buttons allows to set the direction of the landing for the placement of signage. Is present on the Parameter Panel, if the Leader toggle switch is set to position I (enabled).

The following options are available:

•To the right,

•To the left,

•Up,

•Move Down.

The leader landing direction can also be changed in the following ways.

•To change the direction of landing to the opposite, move the cursor to the right/left (if the landing is horizontal) or up/down (if the landing is vertical).

•To rotate a landing, scroll the mouse wheel while holding down the <Ctrl> key.

When changing the direction of the landing, a switch is made between the options for placing the sign on the signage.

When subsequent editing the signage of surface finish placed on the landing, it is possible to change the parameters of leader line using the Leader length and Leader angle fields (the angle of slope to the abscissa axis of the current coordinate system).

Arrow

The dropdown list allows to select the form of arrow of the leader line. Ii is present on the Parameter Panel, if the Leader toggle switch is set to position I (enabled).

a)

b)