|
Symbol Sizes |
Scroll |
The setting of character sizes for a graphic document is performed in the Symbol Sizes dialog, invoked by the Settings — Parameters... command. — Current drawing/fragment — Leader line — Symbol Sizes.
A similar dialog is used to set up symbol sizes for models.
The dialog allows to set the sizes of a circle for the marking symbol, the triangle of the stamping symbol, and the height of designations for connection symbols.
Controls of the dialog for setting up the symbol sizes
The element |
Description of setting |
||
Diameter of circle in the marking sign, mm |
The field allows to set the value of diameter of circle in the marking signs (in millimeters) in a document. According to GOST 2.314-68, this diameter should be within 10 to 15 mm. |
1.1 |
|
Height of triangle of the stamping signage, mm |
The field allows to set value of height of triangles of stamping signages (in millimeters) in a document. According to GOST 2.314-68, this height should be within 10 to 15 mm. |
1.1 |
|
Height of designations for joining by soldering, bonding, sewing and metal stapling, mm |
The field allows to set the height of designation signs of the connections made by soldering, gluing, stitching and with metal brackets (in millimeters) in a document. |
1.1 |
|
If the size of marking and stamping signages is too small, then texts of these designations may go beyond the limits of signages. To change a font in designations, use the dialog for text settings above/below/after the leader landing (see section Text above/below/after Leader Landing). |
Upon completion of setting up the symbol sizes, press the OK button. Click Cancel to discard all changes and close the dialog box.
