|
Node Number – Parameters |
Scroll |
Display parameters of node point numbers for the current graphic document are configured in the Node Point Number Display Parameters dialog, which is invoked by the command Setup — Parameters... — Current drawing/fragment — Designations for Civil Engineering — Node number — Parameters.
The dialog allows to select the type of form of the node number, set the form dimensions and distances from the text to the form separator. For more convenience, an explanatory figure is included into the dialog.
Controls of the dialog for setting up the node number parameters
The element |
Description of setting |
||
Form Type |
The dropdown list allows to select the default form type for designation of the node number. The form type defines the number of circles and line styles for drawing of circles. |
1.1 |
|
1 – Form Size, mm |
The field allows to enter or select the diameter of a circle for node designation from the dropdown list. In case of a double circle, the selected value will determine the inner circle diameter. |
1.1 |
|
2 – Ring Width, mm |
The field allows to enter or select the ring width from the dropdown list – the distance between circles of designations for the node number. |
1.1 |
|
3 – Distance from form separator to text above, mm 4 – Distance from form separator to text below, mm |
The field allows to enter or select the distance from the text to the form separator from the dropdown list. The separator – a horizontal line in the middle of a form – is generated automatically if the text of the node number is two-lined. The line style of the separator is thin. |
1.1 |
Manually entered values of parameters are added into the lists and saved during the running session of KOMPAS-3D.
On completion of the set-up, press the OKbutton. Click Cancel to discard all changes and close the dialog box.
