KOMPAS-3D v25

Name

Purpose

Specifics of

Sketch mode (see section Sketch mode)

Creates a new or edits an existing sketch.

Commands for creating geometric objects and dimensions are available.

Perspective model display mode (see section Perspective))

Displays a model with account of perspective.

You can configure the degree of image distortion made by perspective.

Surface smoothness check mode (see section Checking of surface smoothness)

You can visually assess smoothness of face joints, as well as identify subtle changes in curvature inside faces.

All faces of the model mirror the specified image. You can configure the image view.

Model section mode (see section Model section)

You can visually assess the relative position of parts and assemblies of the assembly model, structural elements of the part, thickness of its walls, etc.

The model is displayed clipped by a cut plane or a set of planes.

When performing operations in this mode, you can specify vertices, edges and faces of the model, including clipped ones, but you cannot specify vertices, edges and faces of the section.

Sheetmetal flat pattern mode (see section Flat pattern)

Displays user-specified bends in a bent state and other bends in open state.

You can perform only the following actions:

•preview and print a model;

•measure geometric and mass-center characteristics of the model.

Assembly components explosion mode (see Explode assembly components)

Displays assembly components in the exploded view (this may be required to represent the assembly more clearly).

Only the following actions are available:

•viewing and printing the model;

•creating reports.

In-place component editing mode (see section Working in the context editing mode)

Edits the specified component surrounded by other components in the tab of the model it belongs to.

Building and editing commands apply only to the specified component. Other components can be seen in the graphic area but cannot be edited, you can use them when executing commands (to specify faces, edges, vertices)

Mode of model dimensions recalculation using tolerances (see section Recalculate model dimensions mode)

Recalculation of model dimensions based on assigned tolerances. Calculation of the model dimensions is performed as per the current recalculation (see section System and user-defined recalculations of dimensions).

You can perform only the following actions:

•preview and print a model;

•measure geometric and mass-center characteristics of the model,

•create reports.

Mode for displaying dimensions of a selected element (see section Display of dimensions for a selected element)

•Reviews dimensions of an object (sketch or operation) outside the process of its editing.

•Changes dimensions of an object.

When selecting an object, its dimensions are displayed on the screen – dimensions of sketches or operations expressed in linear or angular values.

Free-form face editing mode (see the Spline Shape section).

Freely modify the shape and position of a selected face by converting it into a spline surface and moving the points on that surface.

This mode is available if the model contains at least one solid or surface.

Components isolation mode (see section Isolating components)

Displaying the components, solids or surfaces selected by the user and hiding all other objects

Edges, vertices and faces of hidden objects cannot be defined when executing operations in this mode.

Object filtering mode (see the Filter objects section).

Manage the visibility of objects for display in the model's graphics area.

The filter combination is configured separately for each process and for operations outside of processes.

The mode icon appears if at least one filter is enabled for the current process. Disabling the mode automatically turns off all filters enabled for the current process.