|
Line Weight of Special Symbols |
Scroll |
Setup of the weight of lines with which special symbols should be output (both to the screen and to a printer) (for example, signs of surface finish, designation of welded seams, etc.) is performed in the dialog Line Weight of Special Symbols. The dialog appears on the screen after fetching the command Settings — Parameters... — System — Text Editor — Line Weight of Special Symbols.
Controls of the dialog for setting up the line weight of special symbols
The element |
Description of setting |
|
System Settings of Line Weight |
To make the line weight of special symbols corresponded to the thickness of the normal or thin system lines, enable this option. In the field, enter the font height (in mm) at which the applied variant of system line will change. By default, it equals to 10 mm. If the font height is less than 10 mm, special symbols will be drawn with thin lines. If the height is over 10 mm – with normal lines. |
|
User Settings of Line Weight |
To make the line weight of special symbols be proportional to the font height, enable this option. In the field, enter a ratio (in percentages) between the font height and the line weight of special symbols. By default, the thickness of lines is 7.14% (1/14) of the font height. |
Having completed setup of the line weight for drawing special symbols, press the OKbutton. Click Cancel to discard all changes and close the dialog box.
