|
Coordinate Axes – Orientation Marker |
Scroll |
Display parameters of orientation markers of coordinate axes for the current graphic document are configured in the Orientation pointer display options, invoked by the command Setup — Parameters... — Current drawing/fragment — Designations for Civil Engineering — Coordinate axes — Orientation indicator.
The dialog allows to set the dimensions and type of the orientation marker arrows. For more convenience of work, explanatory figures are included into the dialog.
Controls of the dialog for setting up the orientation marker
The element |
Description of setting |
||
1 – Length, mm |
The field allows to enter or set – using a counter – the length of the marker. |
2.2 |
|
2 – Arrow Length, mm |
The field allows to enter or select the lengths the marker arrow from the list. The manually entered value is added to the list and is saved for the current session of KOMPAS-3D running. |
1.1 |
|
3 – Arrow angle, deg |
The field allows to enter or select the value of angle of the marker arrow from the list. The manually entered value is added to the list and is saved for the session of running KOMPAS-3D. |
1.1 |
|
4 – Gap, mm |
The field allows to enter or set – using a counter – the value of a gap between the marker and the mark designation. |
1.1 |
|
Arrows |
The group of elements allows to select the type of arrow for the marker. To select the variant of draw, enable the required option – Arrow, Solid Arrow, or Open Arrow. To make the arrow be filled, enable the Fill with blackoption. If this option is disabled, arrows are drawn as lines. The setup of filling applies to the variants of drawing Arrow and Solid Arrow. The change of state of the option is reflected in the example of an arrow in the Example field. |
1.1 |
Upon completion of the draw setup for the orientation marker, press the OK button. Click Cancel to discard all changes and close the dialog box.
