KOMPAS-3D v23

The element

Description of setting

When image is changing

The group of options allows to enable or disable additional simplifications which will be active in the simplified display mode in case of the following image changes:

•shift and rotation of the model with the mouse or using the Shift and Rotate commands,

•change of orientation and scale of model if the smoothness is enabled (see section Changing orientation),

•shift and rotation of components.

The state of options of this group does not affect the static image of model.

Hide reference axes, planes

etc. is selected.

The option allows to control display of construction and some other model objects. If this option is enabled, then on image change the following commands are activated automatically:

•Hide – Origins of coordinates,

•Hide – Constructive planes,

•Hide – Structural Axes,

•Hide – Sketches.

Hide 3D curves

The option allows to control display of 3D curves curves – broken lines, splines, and spirals.

If this option is enabled, then on image change the Hide – 3D curves command is automatically activated.

Disable the "Shaded

with wireframe" mode

The option allows to control usage of the specified type of model display. If this option is enabled, then for those components or solids which were not transformed into parallelepipeds, on image change the shaded wireframe display is disabled (if it was enabled).

Disable highlighting of selected objects

The option allows to disable highlighting of selected objects (except faces) on image change.

If the option is disabled, then the selected objects remain highlighted.

Availability or lack of selected faces does not influence the rate of image change.

Hide control points,

Hide cosmetic threads,

Hide Dimensions and designations,

Hide diagnostic objects

The options allow to disable drawing of control and connecting points, images of thread, dimensions and designations, diagnostics objects.