KOMPAS-3D v24

Item

Description

Machining Method

The group of buttons allows to select the type of surface finish signage:

Along Contour

The option allows for applying a surface finish designation for surfaces forming a contour.

Leader

The toggle switch controls the presence of a leader line in the landing.

•If the toggle switch is set to position I (enabled), then a leader line and a horizontal landing appears in the signage. On the Parameter Panel, there are elements of setting up the leader.

•If the toggle switch is set to position 0 (disabled), the signage of surface finish created without a landing.

Leader landing

A group of buttons allows you to set the leader direction of the leader line to place a surface finish mark on it.

It is present on the Parameter panel if the Leader switch is set to I (on).

The following options are available:

Right,

Left,

Up,

Down.

The leader direction of the leader line can also be changed in the following ways.

•To reverse the direction of the shelf, move the cursor to the right/left (if the landing is horizontal) or up/down (if the landing is vertical).

•To rotate the shelf, rotate the mouse wheel with the key pressed <Ctrl>.

When you change the direction of the landing, you switch between the options for placing the surface finish designation on it.

When further editing majority surface, located on landing, it is available to change  leader-landing parameters using the fields Leader length and Leader angle (the angle of inclination to the abscissa axis of the current coordinate system).

Arrow

The drop-own list allows you to select the arrow view of leader line.

It is present on Parameter panel  if the switch-off Leader is set in position I (enabled).

a)

b)