|
Mark/Reference Designation — Without Leader Line |
Scroll |
Parameters of marks/reference designations without leader lines for a current graphic document are set in the Mark/reference symbol settings dialog opened using the Settings — Parameters... — Current Drawing/Fragment — Designations for Civil Engineering — Mark/Reference Designation — Without Leader Line — Parameters command.
The dialog allows for setting form dimensions for various types of designations, as well as distances from the text to the form separator. For more convenience of work, explanatory figures are included into the dialog.
Controls of the dialog for setting up the parameters of marks/reference designations
Element |
Description of setting |
||
Form Dimensions |
The group of elements allows to set the sizes for various forms of mark/reference designation. Do the following. In the Shape dropdown list, select the required form type. Set the sizes of this form. •If the selected form requires setting one overall dimension, its value is entered or set using a counter in the 1 – overall dimension, mm field. In case of a double circle, the specified value determines the inner circle diameter. The gap between the outer and inner circles amounts to 1 mm. •If the selected form requires setting two overall dimensions, their values are entered or set using a counter in the 1 – width, mm and 2 – height, mm fields. If a rounded rectangle is selected, the distance between the centers of semi-circles is entered in the 1 – width, mm field. Note that only form dimensions are set in this dialog. The default variant of form and the list of forms available when creating objects are configured in the Mark/reference symbol form filter dialog (see section Form Filter). |
2.2 |
|
Text Location |
The group of elements allows to set the distance from the text to the form separator. The separator, a horizontal line in the middle of a form, is automatically created in the designation if two-line text is entered. The first line of the text is located above the separator, and the second one under the separator. In the Distance from Form Separator to Text Above/Below it, mm fields, enter the required values of distances or select these values from dropdown lists. The entered values are added to the lists and saved within the session of KOMPAS-3D. |
2.2 |
After you complete setup, click OK. Click Cancel to discard all changes and close the dialog.
Setting up the filter of line styles for marks/references designations for a current graphic document is performed in the Filter of Object Line Styles dialog. The dialog is opened using the Settings — Parameters... — Current Drawing/Fragment — Designations for Civil Engineering — Mark/Reference Designation — Without Leader Line — Filter of Line Styles command.
The procedure for the dialog is described in section Filter of Line Styles.
Settings of the form filter for marks/reference designations without leader line for a current graphic document are configured in the Mark/reference symbol form filter dialog opened using the Settings — Parameters... — Current Drawing/Fragment — Designations for Civil Engineering — Mark/Reference Designation — Without Leader Line — Form Filter command.
The dialog allows to indicate which forms will be available on creation of objects, to set their sequence in the list and to select the default option.
Controls of the form filter setup dialog
|
Element |
Description of setting |
|
|
List of Forms |
The list contains the names and samples of all forms of marks/references designations existing in the system (setting up the parameters of forms is described in section Parameters). The forms near the names of which the options are enabled are available in the document: they fall within the list from which the designation form is selected during creation of an object. If you use a set of forms different from the default one, change the setting by enabling or disabling the options near the names of forms. The list of forms includes the Without Form type of designation drawing, which has no options. It cannot be disabled, i. e. it is deemed to be permanently enabled. Therefore, it is permanently available during creation of objects in graphic documents. |
1.2 |
|
Move Up/Down |
The buttons allow to configure the sequence of forms in the list. To change the position of a form, select it and click the required button. The selected form will be moved by one item in the specified direction. The sequence of forms set in this dialog is transferred into the list from which the form of mark/reference designation during creation of an object is selected. The form which is the first item of the list is default. To accelerate creation of objects in the document, it is recommended to make the most frequently used form the first item and to place the other applied forms after it in the descending order of frequency of their use. |
1.2 |
|
Enable All |
The option allows to enable/disable availability of all forms of marks/reference designations contained in the list. It may be in one of three states: •enabled •undefined •disabled If the state of the option is undefined, a click on the option will disable it, the next click will enable it. |
— |
— all the options in the list are enabled (all the forms present in the list are available in the document),
— the list contains both enabled and disabled options (forms with enabled options 
— all the options in the list are disabled (Upon completion of setup of the form filter, click OK. Click Cancel to discard all changes and close the dialog.
Text parameters of marks/reference designations without leader line for the current graphic document are set in the Mark/reference symbol's text parameters dialog opened using the Settings — Parameters... — Current Drawing/Fragment — Designations for Civil Engineering — Mark/Reference Designation — Without Leader Line — Text command.
The procedure for a similar dialog is described in section Caption.
