|
Alignment of Landings of Leader Lines |
Scroll |
KOMPAS-3D allows placing the starting points of landings of several leader lines on one straight line – horizontal or vertical. The operation of alignment can be applied to any dimensions and designations having a leader line in the structure except geometric tolerance designation.
Use the Align leader landings 
command for the horizontal or vertical alignment of starting points of landings for several leader lines.
Step-by-step instructions
1.Select leader lines to be aligned. To that end, in the Subprocess of selecting objects Select the required objects and click Create Object button.
Names of the selected objects will appear in the Objects field on the Parameter Panel.
|
If objects were indicated before invocation of the Align leader landingscommand, then the subprocess of objects selection is not started. The system immediately switches to running the alignment command. |
2.Set a point based on which it is required to align the origins of landings of the selected leader lines. For this purpose, specify a point in the graphic region or enter its coordinates in the Base point field.
3.In the graphic region, phantoms of horizontal and vertical straight lines running through the specified point are displayed. Select the necessary straight line for the alignment of objects. For this purpose, click on the phantom of the required straight line. After indication of the straight line, alignment of objects automatically ends.
Position of landings of the selected leader lines will change so that their starting points were placed at the selected line– horizontal or vertical.
