|
Change fillet size |
Scroll |
To change the fillet size, use the Change fillet size 
command.
Step-by-step instructions
1.In the graphic area, specify the fillet face(s) where the radius needs to be modified. The fillet face should have a profile of a circular arc with a constant radius or with a constant chord. The face name is displayed in the Faces field on the Parameter panel.
|
Specified fillets can belong to either one solid or various solids, including different assembly components. The initial radius of the fillets being modified may be different. |
2.If necessary, enable the By tangent faces option. In this case, the faces of other fillets that are tangentially connected with the specified face will also be modified.
3.Set the fillet radius value in the Radius field on the Parameter panel.
The graphic area will display a phantom of the modified solid.
4.If necessary, change the operation name in the Properties section on the Parameter panel.
5.To complete the operation, click Create object 
.
The fillet size will be changed, and the corresponding icon will appear in the Design Tree .
6.To complete operation of the command, click Finish 
.
Tips
You can set the value of the fillet radius using the defining point or the commands of geometrical calculator.
See Also
