|
Break line |
Scroll |
The default parameters of view break lines in the current drawing are configured in the Break line section of the settings dialog box.
To access the section, call the Settings — Parameters... 
command and in the dialog box that appears select Current document — Break line.
Controls in the Break line parameter Setting section
Element |
Setting description |
||
Break line type |
The drop-down list allows you to select the break line type that will be used by default when creating view breaks. |
2.1 |
|
Amplitude of wavy line in % of the length |
Field for adjusting the amplitude of a wavy or jagged line. Learn more about wavy line and jagged line parameters.... |
2.1 |
|
Maximum alowable amplitude, mm |
Field for setting the maximum amplitude. |
2.1 |
|
Gap |
The field for entering the distance between the gap lines — the distance at which visible parts of the image will be located from each other after creating the gap. The minimum value of the gap is 1 mm. |
2.1 |
|
|
When using breaklines with a bent, the gap must be at least two amplitudes. Therefore, if the default gap is less than twice the maximum amplitude, the default gap is automatically increased when you create a gap bounded by broken lines. |
||
Having finished setting the parameters of the break lines, click Apply and close the dialog box. To exit the dialog box without saving changes, click Cancel.
The setting made in this dialog box is stored in the document itself and is not changed when it is transferred to another workstation.
