|
Orientation indicator |
Scroll |
Setting of parameters of drawing of orientation pointers of coordinate axes for the current graphical document is performed in the Orientation marker section of the settings dialog box.
To access the section, invoke the Setup — Parameters... 
command and in the dialog box that appears, select Current document — Symbols for civil engineering — Coordination axes — Orientation marker.
The dialog allows you to set the size and appearance of the orientation marker arrows.
Controls in the orientation marker setting section
Element |
Setting description |
||
Arrow type |
The drop-down list allows you to select the type of pointer arrow. The following options are available: •Normal arrow, •Closed arrow, •Open arrow. |
1.1 |
|
Arrows |
The drop-down list allows you to select the pointer arrows rendering option. The following options are available: • • |
1.1 |
|
Length, mm |
The field allows you to enter the length of the pointer. |
2.2 |
|
Arrow length, mm |
The field allows you to enter or select from a list the pointer arrow length value. The manually entered value is added to the list and saved during the work session KOMPAS-3D. |
1.1 |
|
Arrow angle, deg |
The field allows you to enter or select from a list the pointer arrow angle value. The manually entered value is added to the list and saved during the work session KOMPAS-3D. |
1.1 |
|
Gap, mm |
The field allows you to enter the value of the gap between the pointer and the mark designation. |
1.1 |
After completing the settings, click Apply and close the dialog box. To exit the dialog box without changing the settings, click Cancel.
