KOMPAS-3D v23

Reference NumbersYou can edit items created in the drawing — change the position of the landing and the leader line, and configure designation parameters. Notes on editing are provided below.

•The position of a landing changes by means of defining points. To do this, select a designation and move the landing's starting point to the place you want. You can also unfold the landing by moving the defining point on its end.

•Changing the leader position has its own specifics depending on the position of its starting point and on whether the designation is associative (i.e. built in the parametric mode) or none:

•Associative designation, the leader starts on a geometric object
Select the designation and move the leader line's starting point within the boundaries of the object it is placed on. You cannot place the point outside the object's boundaries.

•Associative designation, the leader starts within the component projection area
To keep the associative link between the designation and the component projection, start editing the designation and move the leader line's starting point within the boundaries of the projection. The point can be placed within the projection area boundaries or on the geometric object. You can change the point position if Model data is loaded.
If it is not necessary to maintain the associative link, select the designation and move the leader line's starting point to the required place (the point can be placed anywhere in the drawing). The associative link of the reference number with the component projection will be lost.

•Non-associative designation
Select the designation and move the leader line's starting point to any place in the drawing.

•You can configure the typeface and change the text (for a designation not linked with the BOM) in the text input subprocess. To start this subprocess, double-click the designation text. For more details on working in the subprocess of text input...

•To change the Parameters for designation of position Log in to the process of editing the designation and set the required parameter values.