Please enable JavaScript to view this site.

The text parameters (characters and paragraphs) of the technical requirements for the drawing can be customized in the Technical requirements section of setting dialog box.

To access the section, call the command Settings — Parameters... and in the dialog box that appears, select Current document — Document parameters — Technical requirements.

Controls of the technical requirements setting section

Element

Setting description

№ subgroup

Line spacing, mm

Field for entering the distance between lines of text in a paragraph.

Changing the line spacing allows you to keep the distance between lines of text typed in fonts with different character heights proportional (for example, when including any footnotes, comments or notes typed in a smaller font than the main text).

—

Red line, mm

Field for entering the indentation of the first line of a paragraph. The indent is measured from the text border. When creating a new paragraph, the cursor is automatically set to the position with the specified indentation.

—

Alignment

The drop-down list allows you to select the desired method of paragraph alignment. The following options are available:

•To the left,

•To the right,

•By center,

•For full width.

—

Tabulation

Click the link Establish... the dialog box for setting tabulation parameters is called .

—

List parameters

Click the link Establish... the dialog box for setting the list parameters is called . The dialog box specifies the parameters of text paragraph numbering.

—

Set numbering when creating

This option controls the auto-numbering of technical requirements paragraphs when they are entered. If this option is enabled, the numbering of technical requirements paragraphs is set automatically. Enabling or disabling this option does not affect technical requirements already existing in the current drawing.

—

Place technical requirements on the last pages of the document

This option controls the default location of technical requirements.

If this option is enabled, the page of technical requirements is automatically formed on the last page of the document. If the volume of technical requirements text exceeds the page size, a new page is formed on the previous sheet. The text of technical requirements is distributed between the pages as follows.

•The beginning of technical requirements is moved to the page of the previous sheet, and it is filled in completely.The

•text that goes beyond this page is placed on the page of technical requirements located on the last sheet.

•Newly entered technical requirements will fill this page. If, when continuing to enter technical requirements, their volume again exceeds the page size, the next page on the previous sheet will be automatically formed and the text of technical requirements will be redistributed between the pages in the same way as discussed above.

If this option is disabled, the page of technical requirements is formed on the first sheet of the drawing. If the volume of the technical requirements text exceeds the page size, a new page is automatically formed to the left of the first sheet frame. The beginning of the technical requirements remains on the first sheet of the drawing.

The state of this option determines the result of the Auto placement of technical requirements command. Enabling or disabling this option affects the technical requirements positioning only if it has not been changed manually (see Placing technical requirements on the drawing).

—

Synchronize technical requirements

This option controls the automatic transfer of technical requirements from the model to the drawing. If this option is enabled, the technical requirements defined in the model are transferred to the drawing when creating an associative view; if it is disabled, they are not transferred. The conditions for transferring technical requirements from model to drawing and how to update them after editing are described in the following section Transfer of technical requirements from model to drawing. Synchronization.

—

Font parameters

Font

The drop-down list allows you to select the desired font. The list contains all fonts connected to the OS.

2.2

Different from default font

The option allows you to set the font to match or differ from the document's default font.

If the option is disabled, the font always matches the default.

2.2

Style

The elements group allows you to set the straight, italic or thickened character layout.

2.2

Color

A field that displays the current color of the symbol. To change the color, click in the field.

2.2

Height, mm

The field allows you to enter a character height value (in millimeters) or select this value from the drop-down list. The manually entered value is added to the list and saved for the duration of the session KOMPAS-3D.

2.2

Width, %

The field allows you to enter a character width value or select the value from the drop-down list. A manually entered value is added to the list and saved for the duration of the session KOMPAS-3D.

2.2

Preview

The preview window shows the appearance of the text. This allows you to visually evaluate the changes made.

—

 

 

 

 

 

Indent

Fields for entering the distances between the left and right borders of the input field and the corresponding text borders.

—

 

Interval

Fields for specifying the distance between two adjacent paragraphs. This distance is made up of two values — the spacing after the first paragraph and the spacing before the second paragraph. Setting the spacing allows you to highlight paragraphs in the document for better reading comprehension and to draw attention to important information.

—

After completing the settings, click the dialog box Apply and close. To exit the dialog box without changing the settings, click Cancel.

© ASCON-Design systems, LLC (Russia), 2025. All rights reserved.