|
Receiving parameters of surface roughness from the model. Synchronization |
Scroll |
The parameters of majority surface finish can be transferred to the associative drawing from the model source of associative views. They are transferred automatically when an associative view is created if the following conditions are met.
•Parameters of the majority surface finish are set in the model. Details...
•Transfer of the majority surface finish from the model is enabled in the drawing.
The sign and parameter of unspecified surface finish – values of corresponding properties of the model. You can enable/disable transfer of property values from the model to the drawing when you creation of an associative view, Filling in the title block of the drawing and Editing drawing properties. The following elements of the Parameter Panel are used for that:
•The toggle switch Connect to model properties must be set to position I (enabled),
•The list of properties transferred from the model — you should enable the options in the rows Majority Surface Finish Symbol and Parameter for Majority Surface Finish (see Figure).
The majority surface finish is transferred from the model to the drawing, regardless of whether its display in the model is enabled or disabled.
If at the time of transfer, the majority surface finish was set in the drawing, its parameters are replaced by parameters from the model.
Parameters of the majority surface finish are transferred to the drawing from the same model as all the other properties. For details on choosing the property source model...
Changes of the majority surface finish made in the model are transferred to the drawing when it is rebuilt. Request to rebuild Appears when the drawing is opened or activated.
The majority surface finish obtained from the model can be moved, edited and deleted. More details on editing and deleting majority surface finish...
Transfer of parameters of the majority surface finish in the reverse direction, i.e. from the drawing to the model, is not provided.
If you change the majority surface finish in the drawing, the transfer of its parameters from the model is stopped — the options in the Majority Surface Finish Symbol and/or Parameter for Majority Surface Finish lines of the property list will automatically be disabled. Figure).
You can synchronize parameters of the majority surface finish in the associative drawing and in the model. To do this call the Synchronize command from the context menu of the designation. After the command is called, the options in the corresponding rows of the property list are automatically enabled.
In addition, you can resume transferring majority surface finish from the model by enabling options in the desired rows of the property list when editing the title block or the drawing properties.
|
If the majority surface finish resulting from the model was moved in the drawing, the position of the designation will not change after synchronization. |
Transfer of the surface finish from the model is also stopped when you delete the majority surface finish in the drawing. In this case, in order to restore surface finish, you should enable options in the corresponding rows of the property list when editing the title block or the drawing properties.
